Uninstall windows ink - how to decide
How do you remove pen ink from Windows?
- Open the Local Group Policy Editor. Navigate to: Computer Configuration ->Administrative Templates ->Windows Components ->Windows Ink Workspace.
- In the right side pane, double-click Allow Windows Ink Workspace to open its properties.
- Check the Enabled option. ...
- Click on Apply and then OK.
This is from the woodwork I'm Tommy and I have these seven products that I want to try to try and get the ink stain off my wooden desk a wood stain on it and I'm pretty sure the finish is a combination of oil and wax and someone is oozing ink into the wood and staining in several places and it's actually pretty bad so what I have done is some of the most commonly recommended products for removing ink from wood and we shall see what they are I also want to add that none of these products claim to remove ink from wood, so it's not their fault if they don't over the years to come down and spread as you watch more woodworking and DIY articles If you're just starting out in this hobby, consider subscribing. Check the description There is a free download that you may find helpful in% Acetone, I'm I got several rags and we're going to use different parts of the ragto to keep them from mixing. The stains are gone - well that was a complete disaster I had a bad feeling this was going to happen I should have tested this on the bottom or somewhere else but I think I can honestly fix that next with shaving cream from all of these products There are a few that I think won't work I don't think the toothpaste will work I don't think the dish detergent will work Baking soda has a better chance in my eyes But I absolutely don't think the shaving cream is ink gets out of the wood but we'll see okay that's a minute to set i see a lot of scrubbing in my future it doesn't look good for the shaving cream when i look at the rag here i don't i believe when You just sit here and see the rubbing from the scrubbing and scrubbing, you'll eventually remove everything but what the cleaning power and the breaking up of the ink and remove them from the wood I think I'll have them call shaving cream I haven't used up any dish soap although I have shaving cream here at this point I don't think it makes much of a difference I'll go ahead and try that with that Cleaning up dish soap I don't think this will work, but it's' got to work better than the shaving cream and I think I'll let that dish soap sit there for a second, okay, that's been a few minutes, let's come back I see no progress there i don't see any ink transferring and the ink stain looks about the same size so i call the dishwashing detergent a failure next 91% isopropyl alcohol i even hesitate a bit to use this alcohol but i think it's a bit easier it gets a bit Need work but it's not quite as disgusting as the acetone is yes that's as if it comes a little closer But we're also assuming we removed quite a bit of that oil finish which is fine so 91% alcohol took that away right away and it really didn't do much to the finis hit doesn't look as bad as that next I'm going to try this fabric stain remover Wipeokay that had a while to soak I don't see any ink coming off It doesn't look like the stain remover is working at all I don't see any ink on whatever I've been scrubbing here for about two minutes So let's call the stain remover toothpaste next.I have backed up in a different place behind the two we were just working on, and let's see what the toothpaste does like the last couple, I'll spread the smear generously and let it sit for a moment i have no great hopes for toothpaste by the way i see a little ink transfer the ink stain is definitely still there, but i think so It looks a lot easier, what do you think please let me know in the comments and if I sit down at my desk, take a rag and put some alcohol on it, I could clean every stain on this desk in about five minutes if I got this toothpaste so it is probably took me an hour hour and for practical reasons I say the toothpaste is probably torture but I mean it has taken the ink against all odds and despite the fact that it is really impractical there are better ways to call toothpaste a success to take the baking soda and mix in some water and let's see if it can surprise us good baking soda as always we will let it soak in I'll rub it in really well okay so i just see from rubbing in.
You can see right there how the ink is transferred. Would you look at it picking up that stain, what about baking soda and its magical ability to solve problems, completely clean, honestly, it looks a bit dull, I look at it from the side, it looks like this The finish dulled a little but it doesn't look bad at all and it used up just as quickly as the alcohol.We finished our last test so let's talk about the results, so we had three products that actually inked wood remove, and then we have four? that failed, but of the four that failed, I mean I think you could technically say that acetone removes ink from wood, it's just that the sheer carnage that associated with the destruction of my desk, it obviously renders it unsuitable, which I would have known if I had read the back of the bottle which is harmful to wood surfaces ... so if you ever see one of these v to remove ink from wood or maybe something I haven't tested here let me know in the comments, be sure to subscribe - if you want to see more articles will be on screen thanks for watching and I'll see you next time
How do you open a window cartridge?
Right-click anywhere on the taskbar and from the context menu select Show Windows Ink Workspace button. An icon of a pen writing in an “S” shape will appear in the notifications area to the far right. Click on that and the Ink Workspace appears.
If you want to go from here, check out this article Hey this is Bob here and I'll show you how to oil out your window or lubricate the duct balancing, there are 2, there is one on each side, it's very easy to do, sometimes you know if that is Clips I'll show you when I take the duct balance out, but sometimes the clips break on each end or the spring rusts inside and you'll know if it just needs to be replaced. They cost around $ 10-15 each and there's a place online if you search for 'Duct Balance' 'Window Duct Balance' There's pretty much a place they sell. My home is in South Florida So at least for me I found there was only one place they had to do it is on each side of the window, there are these Clipsok and what you have to do is just slide it up when you put it up slide, the bottom of the clip comes out and what happens when you lift the window it catches the window frame and you just slide the window up and the channel balance stays here in the lower part of the window there is one on each side you may need one Use screwdriver up, then just use a screwdriver and just pull it up.
Just lift the window then you push the window sideways ok You see the channel balance is right here, it's trapped It's held by this clip, here ok there's one on each side So that's what we're going to do right here Well like i said the clips i was talking about at each end of this channel balance here there are these plastic clips let's see if i can get this down ok there is the bottom clip sometimes these things break down over the years I am also going to show you how to identify your channel balance for what you need There is a number I had a four digit number and basically it tells you the load it can handle, the weight and length Okay, so take it I got one out Ok so w What you have to do is there is a spring here and there is tension here Trying to push yourself up like there's still a window attached here So it wants to go up but the clip holds it in place in place So what you have to do is just press down just kind of edit it because it kind of goes in at an angle One page goes in first So you pull a page out then you can somehow get it out and like I said there's one here Tension so I'm slowly lifting it up, that's the hardest part because you need to get the clip away from there. It comes out, OK, here we go, OK, so there's the clip, OK, and now I'm going to the garage and I can show you what the whole piece looks like, OK, so basically that's what I'm doing, now take another silicone spray, this is basically if you want to try avoiding buying a new one like i said, if none of the clips are broken you know if it looks like you can get away with it i did this with multiple windows and it seems to work the windows were very hard to raise um, you just know it sticks very badly and i tried spraying some silicone into the rail without taking anything apart but basically it's this part that goes up and down go when you lift the window and I'll demonstrate that now. Imagine that's in the side in the clip and then it's this pulley system for years, it just gets you where it needs a little lubrication Okay so what I did was coat the spring ok and then the pulley here me try not to do too much because i don't really want to saturate this nylon wire but when i did a search online i never really saw anything that looked more like a pair matched these things then just a replacement i have a lot of articles seen how to replace them but i don't think i saw any article how to do that ok and then now i have done this on this one so it's pretty good just nice of the job you know and after you do that i mean you can always give it a try and if it doesn't look like it will work after you paste it like i said these are as depending on the si like ze you need they are like 10 $ 10 to 15 $ they sell even if you wanted to, they sell the things that have the little rivets where you can actually take these out and replace those clips, but I didn't mean to mess with that so figured I would buy the whole piece and I've done this on multiple windows.
The way to identify these things is, here's a number, let me see if I can bring this thing closer, well I don't know if I can show it, maybe it'll show up, there's one Number right here this says 3020 Ok, that's the number you need when you go online You will know what I mean when you start looking like I said there is pretty much a place that sells these Well, at least for my window These are for My house was built in 1983 and thats what worked for my windows so just smear it anyway, smear it back and forth i know my kitchen window was like the worst, it wasn't just you have to worry about d Leaning against the sink that you know you don't have a lot of leverage there and it was just always al it's very hard to open and we never really opened it because it was just a pain in the butt opening so I did took the channel balances out and done exactly that works fine, put it back in and the window works perfectly, that's what worked for me so i will go put them back in now ok so you take you will take that little hook and here is a notch you will get it where you can feel it snap back into place feel it press in and you just slide it down you want to walk past the hook the clip on the side ok now we can put the window back on it's actually here the thing i have an alarm system so i have these magnetic contacts right here on this side so i you have to go in with this side first ok for you to slide in a side di e slide in the other side and slowly lower the window and it will slide right back onto those balances Ok then you will slide the clips back down They sell these plastic clips too They sell everything I had to replace not on this window but I had to get one the locks replace the lock and that's it, you're good to go it's very simple I've known for years, I mean, we moved in here in 1996 and for years on one of my other windows I had a broken bolt, not the bolt, but the guard think me, I was like I didn't know, but when I got on the internet and did my research, I found out how damn easy it was to take out those windows. Then I started replacing the scales.The garage has been broken for years but I didn't care because it was in my garage, it was a side window and we never opened it anyway, but I had a couple of other windows Now I am went around and fixed all my windows my son's window we had to use like a board to hold it up because one of the sewer scales was totally broken and you need both for the weight so we always had to have to open his window whenever we wanted to put a board in it to hold the window up it was real agony so anyway i hope this helps somebody like i said either replace them either it's not a huge hassle but you know if you have a lot of windows it can add up, if you can smear it and get it working again smoothly then this is the way to go.
It doesn't hurt to try that I said hope this article helped thank you
How do I turn off Windows ink Reddit?
To disable Windows Ink one needs to go to Huion settings and uncheck the checkbox 'Windows Ink'.
Brew: A young man comes out of his bedroom. He stomps down the hall to his living room and gets a glass of water. He sees it out of the corner of his eye.
A small sticky note sits on his back desk chair. He grabs it and sees it reminding him of some errands he had to run, but it's strange because he can't remember putting it there quickly in a fight for his life himself. Any of our stories today will have a creepy premise with a surprisingly simple twist.
If you have any questions, don't hesitate to speak to the experts, get on board! In May 2015, Reddit user RBradbury1920 was searching the subreddit r / legaladvice for legal remedies for a problem with his landlord. He noticed that on April 15th he had a yellow post-it note on his desk with a reminder of some errands he hadn't told anyone about. It was in strange handwriting that he had never seen before.
At first he had thought nothing of it and assumed that he had written it himself while half asleep, which would explain why he could not recognize the note. Days later, on the 19th, he found another Post-It on the back of his desk chair. It said: keep your documents.
He immediately checked the door to his apartment, but it was nothing unusual. He checked the windows, still nothing. The note was written in the same handwriting as the last one, but he began to doubt that no one had broken into.
He made a decision. He was going to have to set a trap. He positioned a webcam to watch his desk and set it up to record every movement he saw.
Whatever happened, this time he would catch whoever it was. Grill: If no one broke in, who-Chill: -or whatGrill: -did the notes? Brew: Then came the third note. It sat there, Stea It was quick and terrible, and almost challenged him to read it.
He approached slowly and painfully and read it. 'Our landlord won't let me talk to you, but it's important that we do.' He immediately turned to check his computer with the webcam footage right on his desk.
He opened it and, to his horror, it was empty. It had been erased. Grill: What about the chill: —the wastebasket !? Brew: He checked, but he was emptied the night before.
Realization soon dawned on him like a truck. Whoever left the note saw the webcam and deleted the footage. Less than two days later, on May 1st, he found another note on the door to his bedroom.
In contrast to the others, this one was empty, as he stalked through his apartment he found more and more. Notes of all colors were scattered like eyes in wild darkness, devoid of the weight of the unknown. But that was when he realized it.
He ran back to his desk to look for a note he had received from his landlord when he was moving into the building. I don't want it to be true, but there it was in plain black ink. The handwriting on the previous notes matched the handwriting on the letter.
He was sure it had to be like that. Grill: The landlord broke into the middle of their apartment one night? Brew: Or was there something much more sinister at work? My assistant did the work on this next story. Would you like to take it with you, quiz? Quiz: Sure Brew! Our next Terrorist story begins in a small suburb of Los Angeles called Sherman Oaks.
The writer Carrie Poppy lived in a shabby guest house next to someone else's house. When she came across something she couldn't explain. It started after she went to an occult bookstore.
When she arrived she felt something dark. Something she would have called 'a bad spiritual presence'. It seemed to linger in her head.
She was 'overwhelmed by this negative feeling'. When she left she thought the feat was over, but she was wrong. Whatever she felt there followed her home.
At first it was just 'the feeling of being stared at,' but it quickly evolved into a physical feeling. In her words: “I started to feel this pressure in my chest, much like the feeling when you get bad news. But it started to sink deeper and deeper and almost hurts. ”Grill: That must be a ghost.
What else could it be? Chill: Maybe someone broke into your apartment? Grill: How do you explain the feeling in her chest then? not explain everything. Can you explain how the sun rises every morning? Can you explain a mother's love for her child? No Sirree.Quiz: Soon she heard strange noises. 'As if something passed her by,' but whenever she looked she saw nothing but her two dogs, who were conspicuously licking their own feet.
Chill: No, no, that's definitely a ghost that something was there. 'Could it be that she was actually being watched by secret criminals? I was just lurking out of sight? Or was it moving a little more in the shadows? Brew: Our last story begins on November 15th, 1921, as a woman who burned down just as Mrs. After some desperate inquiries, they moved into an old Victorian house.
It was broken, had no power, and was instead lit by gas lamps. H and I had only been in the house a few days when we felt very depressed. The house was overwhelmingly quiet. ”She continues,“ The servants walked around on the thick carpeting so quietly that I couldn't even hear them doing their work. 'Unfortunately it wasn't quiet for long.' One morning I heard footsteps in the room above my head.
I hurried up the stairs. To my surprise the room was empty, and then to all the rooms on that floor and then to the floor above to find out that I was the only person in that part of the house. ”Sometimes after going to bed she would hear 'Tremendous' noises from their storage room.
Sounds like 'furniture is stacked against the door, as if porcelain is being pushed back and forth and every now and then an anxious sigh or wail'. She even felt like 'someone was following her and touching her'. Was there someone or something in the house? One day, walking into the dining room from her family's living room, Mrs.
H saw a strange woman dressed in black from head to toe and sailed across the room towards her, but when Mrs. H 'went quietly into the dining room, to meet her, she disappeared ”. Later, Mrs.
H's son came into her bedroom and asked why she had called. She told him she didn't, which confused him. Then he said with wide and frightened eyes: 'Then who called me? Who made that pounding sound? '”.
Mrs. H assured him, contrary to her own suspicions, that it was only the wind rattling against his window, but he insisted that someone was looking for him. Then came the last straw.
H had been in bed for a while. The light in the house was turned down and the last chatter of the children had slowed down. Everything was quiet.
She lay there thinking of the strange noises as the sheets were ripped from her body and she ... felt a sudden force pushing her to the floor.
It felt like she was stuck on the shoulder, but when she recovered and looked around the room, she saw something that made her freeze to the bone. At the foot of her bed sat two dark… figures, a man and a woman. The woman was “young, dark and thin” and wore a large picture hat.
The man was unrecognizable. There was nothing H could do but lie paralyzed, terrified, while the figures stared back. Grill: Oh, it's like Parasite, you know, the movie, with people hiding in the house - now the family is slowly being picked up one by one.
Brew: Maybe ... wink.
Do people say wink when they wink? Grill: Uh, don't wink at me, just tell me, please! Brew: Make Poppy's story quiz and you could see it. Quiz: Just before the end Poppy decided to contact a group of ghost hunters. Although, as she said, they were 'a special kind of ghost hunters, they were skeptics'.
She asked them to explain their experience, to which they replied, 'Have you heard of carbon monoxide poisoning?' And to her final grief, she discovered that symptoms of CO poisoning had chest pressure , Confusion, loss of consciousness, auditory hallucinations, and an inexplicable feeling of fear. She called the gas company, told them she thought they had a gas leak and they needed to send them something. When the technicians arrived they said, 'It's really good you called us tonight because you had a lot may soon be dead. ' Grill: Then what about the boy with the sticky notes? Brew: Well, it turns out, he left notes all over his own apartment! He says in another Reddit post, 'Upon further inspection' his landlord's letter did not match the handwriting on the slips Not even a letter from mine Landlord ...
It was a letter from my mother. ”Grill: You tell me that the landlord didn't break in? Brew: No! It was simple carbon monoxide poisoning. Monoxide, or CO, isn't necessarily dangerous.
In his post he asked for legal advice but ended up getting life-saving information because when he plugged in his CO detector, it 'reads at 100ppm', 'parts per million', it doesn't seem that high, but you can feel the effects of poisoning at concentrations as low as 10 ppm. The problem is that gas fills spaces like a liquid. Inhaling a little CO won't do you any harm, the real danger is that it will build up.
When you burn something, the fire consumes oxygen and replaces it with carbon dioxide and the fire has less oxygen to burn, it starts to let off carbon monoxide. If your home or any other room you are in is poorly ventilated, this can make that room more prone to gas build-up and as the concentration of CO in a room increases, your body will begin to use it instead of air to breathe . That means your lungs are simply pumping you full of carbon monoxide instead, instead of putting oxygen into your bloodstream.
This leads to hypoxia, or low blood oxygen, which is nice Bad Time. If the oxygen content is low, your heart rate increases, a cough begins, the skin can turn blue and above all confused by the ghost stories or delirious. Chill: What about Mrs.
H? Brew: Your problem was that your stove was sending CO fumes back into the house rather than out the chimney. Mrs. H.'s brother-in-law discovered the problem through quick thinking.
The scary thing about carbon monoxide is that it is odorless and colorless. You won't know it's there unless you look for it. It'll choke you in your sleep.
In the words of RBradbury1920, 'The passivity is the scariest element, I think.' If you think you have a CO leak, get outside immediately and call the fire department or your gas company for a test. The best way to ensure that you and your loved ones are safe in the future is to make sure you have a working carbon monoxide detector, test it regularly, and make sure your home is well ventilated.
Like a ghost, carbon monoxide doesn't exist in spite of, but because it has nowhere else to go. It can kill us by living with us, so it's ghostly that way too. Just as ghosts, the remains of the souls of life, are trapped in an earthly form, so carbon monoxide is also trapped from human consumption, trapped in an airtight seal.
So often the truth is less exciting than what we fear, but that calms me. As Poppy said, “You don't have to worry your entire life that you are going to another haunted house. Call the gas company if you feel this again. 'Just in case you need a reminder, take this little poem I wrote: If oxygen is what you need then take a moment to breathe, But when you find yourself ? Confused Carbon monoxide was spread.
Twist: “What a twist in a ghastly story. If dark mysteries are your domain, for a story about how the disappearance of a young girl led to a tangled web of fraud and crime that stretched from the depths of the Italian mafia to the heights of the Holy See itself, Pope John Paul II. Click here to join my Twist channel.
How do I reinstall Windows ink?
- Tap the Windows Ink Workspace icon on the taskbar.
- Tap Get more pen apps under the Suggested area.
- The Windows Store opens the Windows Ink Collection, where you can browse all the apps that support the pen. Select an app and tap install.
There could be several reasons for reinstalling Windows 10 on a computer that already has Windows 10 installed. In this guide, I'll show you how to reinstall Windows 10 from start to finish using the built-in utility. So stay close ... sometimes the built-in utility won't work and you may need to use a bootable CD, DVD, or USB stick.
I have a article showing you exactly how to do this that I made a few years back. I've linked below and above. So let's take a look at my computer and I'll show you exactly how to do it.
We are in Windows 10, click on the start button and go to the settings. Scroll down under Update & Security. Here we have the restoration on the left.
Here we have two options. One would reset that PC and you would be up and running right away. The other is the advanced startup which allows you to do some other things that you might want to consider troubleshooting before doing a reset.
But we won't do that in this article. That's for another article if you're interested. Let me know in the comments below.
I can then show you some of the advanced bug fixes. We're starting and from here we have two options. One of them is to keep your files safe.
This is very convenient so that you don't have to worry about backing up and restoring the files, but all programs, apps, and settings will be erased. So you have to reinstall all of your programs. So if you are using this for your personal use, then this is what you can do.
It is practical. If you still create a backup, or if you want to delete it to give away to someone else, I strongly recommend removing everything. We'll remove everything.
And now you have a few more options; You can do the cloud download, which will download and reinstall Windows with the latest version, or the local installation, which will use the software to reinstall based on the current device. This is much faster, the download to the cloud would be more up-to-date, but it takes up some space and takes time depending on the speed of your internet connection. For this article, we'll assume you have the latest version of Windows and or specifically the latest version of Windows 10.
Therefore, this version of Windows 10 is simply reinstalled. So let's go to the local reinstall and it confirms what it's going to do. The current setting is to remove the apps and files but not clean the drive and then reinstall Windows.
Let's take a look at the change settings. This has changed from previous versions. You need to change the settings to see this information.
There you can clean up the data. As I mentioned earlier, one of the reasons you may be passing them on to someone else is one of the reasons. In this case, you should definitely enable this.
That makes it a little harder for anyone to do a data recovery and get your data back even after you've deleted it. Then you have the option to download Windows again. To reinstall or activate Windows from this device, the copy will be downloaded.
Although we have been asked to do so before, it does ask us again to make sure we are sure of our options. So let's leave that and let the drive clean, and we hit 'confirm'. So here we learn what it will do, including cleaning the drive.
That's great, we'll go ahead and hit next. So it starts preparing for removal and confirming what it will do. We press 'Reset' and it will now start preparing for the actual reset.
Now we have come to a point in the installation where we will be asked to select a few options. So let's go through it. First the region asks, so I'm in Canada.
So I'll scroll to the top ... select Canada and click 'Yes'.
Then the keyboard will be asked if it is correct. Usually it is correct. It's the US, even if you're in Canada, it's still the US.
You may find other options that apply to you, but it's not the language, it's the keyboard. So you need to check what type of keyboard you have. If it was a US English keyboard, you would select US, and it usually does.
So we would click 'Yes' and not add a second keyboard layout. So let's skip that. Next we're asked for a license agreement that we have to accept.
They expect you to scroll through the agreement and read it. If you have read them and agree to them, accept them. You don't have much choice if you want to continue.
Now it's your choice how to set it up. If it is for personal use, which it usually is, or if it is for an organization, you would do it through your company and there would be other traffic there. Most of the time, however, you set it up for personal use.
This would be the way you sign in with a Microsoft account as opposed to a company where you sign in to a server in a domain network environment. Next, you can log in. So if you want to sign in with your Microsoft account you enter your email address and then go through and add your password.
However, if you don't have a Microsoft account and want to sign in with one, you can create one right from here. However, if you want to be offline, which means that you can still access the Internet on the computer, just don't sign in to Microsoft when you sign in to the computer. You only have a local username and password.
So that information is only stored locally on the computer. So in this case we would choose an offline account and here we are asked to sign in to use a full range of Microsoft apps and services. So they really encourage you to click next and say I changed my mind.
I sign in with a Microsoft account. NO! I want the limited experience. Now I can enter my name. and I can enter a super secret password. and we try not to enter a password.
Just in case you want to and it allows us to forego a password, but I strongly recommend that you use a password. Now there will be a number of questions here. Ask yes and no or basically one question above and one question below.
And I would say if you don't understand what that means then after reading it and if you really don't know then you would just go for the second option here which is basically the more private option. The top option here gives you these benefits. But it's less privacy.
So it's entirely up to you, but as far as I use your location you have these advantages, but of course no, I don't want anyone to know my location. And when you find your device it's great, but if you've lost it, you need to track it to know. So if you don't want tracking, say no, and again the top Diagnostic Information option will send all or just the necessary diagnostic data, hands-free and input, so that's something else services.
You don't need any of these things. You can say no to anything, advertising, and now she's asking about Cortana. A lot of people don't like this, so we'd say not now.
And now we're back to Windows and have done a clean installation of Windows. If you chose the first option to keep your data, then your data would simply be displayed again. You would see it there on your desktop and in your documents.
However, if you choose to erase it, including the data, it's just as fresh and clean. Edge will ask you what you did in the previous versions. If you say later, it is about continuing to annoy you, but you can say, let's go.
It takes a moment to prepare and you want to encourage them to sign up, but you don't have to. You can be offline again. So click Finish Setup and there it is; Log in to synchronize the data; if you want to synchronize between your different devices or if you want to continue without signing in; and now we have our Edge browser setup and a fresh copy of Windows.
That's it for this quick guide, and I hope you found it useful. If so, please click the 'Like' button, consider subscribing, and ring the bell to be notified every time I post a new article tutorial or livestream. Thanks for watching, we'll see in the next one.
Goodbye for today.
How do I disable Windows Ink?
Method 1: Disable Windows Ink Workspace in Windows 10 Using Group Policy Open the Local Group Policy Editor. Navigate to: Computer Configuration ->Administrative Templates ->Windows Components ->Windows Ink Workspace. In the right side pane, double-click Allow Windows Ink Workspace to open its properties. Check the Enabled option.
Where do I find Windows Ink Workspace in Windows 10?
Use the Windows key + R keyboard shortcut to open the Run command. Type gpedit.msc and click OK. Select Computer Configuration. Expand the following path: Administrative TemplatesWindows ComponentsWindows Ink Workspace. Note: It's worth pointing out that if you see two 'Windows Ink Workspace' entries, you must choose to configure the second one.
How to disable Windows Ink workspace using the registry?
How to disable Windows Ink Workspace using the registry. Right-click the Microsoft key, select New, and click Key. Name the new key WindowsInkWorkspace. Right-click on the right side, select New, and click DWORD (32-bit) Value. Name the key AllowWindowsInkWorkspace. Double-click the key and make sure its value is set to 0, which means disabled.
What can I do with Microsoft ink on my computer?
Windows Ink, or Microsoft Ink or Pen & Windows Ink, is a suite of software that allows you to use a digital pen or finger to write and draw on your computer screen. You can edit text, write notes, and, draw, capture a screenshot of your desktop, mark up, crop, and share your creations.