Home > FAQ > Wlan autoconfig dependencies - how to settle

Wlan autoconfig dependencies - how to settle

How do I fix WLAN AutoConfig service?

In order to fix this, you can follow these steps:
  1. Press Windows Key + R and enter “services. msc” followed by the ENTER key.
  2. Find “WLAN AutoConfig” in the list of service, right-click it and select Properties.
  3. Press Start & change the startup type as 'Automatic'.
  4. Restart your computer.

Hey what's up guys Sandeep here and that's another common problem with Windows 10 that sometimes you won't see a WiFi option in settings, even in the system tray and in settings, if you click that option you will You cannot see WiFi networks and if you switch to Network and Internet, you cannot see any networks listed there on your Windows 10. In this article I will show you how to fix this problem on your Windows 10 The first thing you should check if there is a problem with Windows 10 or a problem with your computer hardware like the network card for which you can go to the start menu, then look for cmd and then open the command prompt, now type the ping and then the space 127.1 .1.1 then hit enter on your keyboard and if you get this kind of response then there is nothing wrong with your computer hardware.

It's just a Windows 10 problem. Okay, let's fix this problem on Windows 10. The first thing you should do is go to start up and sear ch for the control panel and from there go to network options.

Now go to the 'Advanced' tab and just click on 'Restore advanced settings' and then click on 'Reset' and click on 'Reset' again. The next thing you can do is press the Windows R key on your keyboard and type their services.msc then hit OK and you will get a list of Windows services on your computer from there you need to look for WiFi auto-configuration and make sure this service is running.If it is not running, you will be given an option above to start this service.

You can also right click on this service and go to properties. From there you will be given the option to start it from here and make sure it starts tab is selected as automatic and after that hit apply and ok and you will have to restart your Windows 10. and if the wifi auto configuration service is already running you need to follow the next method to start this and open up the settings and go to network and internet and then go to change adapter options, click on it and your wifi adapter will be listed there If it is disabled you have to right click on it and click Enable but if it is already enabled then you can try disabling and re-enabling this wireless adapter.

Just right click on it and click on Disable. Then click Activate. This will enable the network adapter in your Windows 10 to be activated and you can see the networks and if it still doesn't work, press the Windows r key on your keyboard and enter your devmgmd.msc.

Then click OK and look for network adapters on this screen and expand the options. Your WLAN network adapter is listed here. The network adapter written there can be Broadcom Etheros Realtech or another network adapter.

Now right click on it and click on Update Driver. Since you are not connected to the wifi, you cannot search for automatic c Driver installation Click on Browse my computer for drivers then click on 'Let me choose from the list of available drivers' Now you have to select the driver up to the date where your wireless network was working and click 'Next' to install the driver, or you can also try installing other drivers to check. After that, you need to restart Windows 10 and check if the WiFi option is shown or not.

If not, please return to this page. Right click on this network driver and click Properties and then go to Power Management and uncheck this option. Computer can turn off this device to save energy.

Then click OK and then see if you get network options. If not, come back to this page again. Right-click your network driver and click Uninstall Device, then click Uninstall.

After uninstalling, you will need to restart Windows 10. As soon as you restart the PC the driver will be automatically reinstalled and it will check if you are able to c connect to the internet or not I mean if you get wifi options or not and if you always get the wifi option Can't see it yet, go to Network and Internet Settings and then click Network Reset Click Reset Now Click Yes to confirm, and after that Windows 10 will restart and reset your network settings. Everything related to the network will be deleted and it will restart.

If it still doesn't work, go to the start menu, look for cmd, right click on it then run as administrator and you can try to fix network socket error if you run into problem by You type netsh space winsock space reset, then press Enter and then type netsh space int space ip, then space reset and then press space reset log.txt and then press Enter on your. press keyboard and it will delete the IPv4 logs from your Windows 10.

After that you need to restart your Windows 10 and check whether you can see WiFi networks or not, if it still does not work you need to get another working computer where you can access the internet, go to google and just search for your laptop's model number and network driver. If you have a custom PC, you can find the network card driver, just find the motherboard model number or network card model number and if it's a laptop, download the driver. So I need to download the network driver for the laptop manufacturer's website.

You may need to choose your operating system and after that you will get this type of network driver like Intel Wireless Lan or other other WiFi driver and then copy and paste the driver to your computer and install it after the installation you can use the WiFi network see for the most part. In most cases these methods should help you fix the problem, but if you still get the problem then press the windows r key together on your keyboard type in your ms config and then press ok, now go to the 'tab Services' and click on 'Activate'. you have to restart your Windows 10 afterwards check if you can connect to the network or not.

These were some methods to fix the problem when you don't see the WiFi option in Windows 10 settings and you can't connect to the WiFi network and that's it for this article guys and two of them still watching. I wish you all the best for the coming year and a happy new year in advance

How do I fix Windows could not start the WLAN AutoConfig service on local computer?

How do I fix WLAN AutoConfig error 1068 in Windows
  1. Restart Your Router.
  2. Run the Network Troubleshooter.
  3. Check the Adapter Settings.
  4. Restart WLAN AutoConfig.
  5. Edit the Registry.
  6. Repair Files With the System File Checker Tool.
  7. Reinstall the Wireless Adapter Driver.

silverlight won't install

I want to start the service of SQL Server (SQLEXPRESS). But there is a problem. To know what the real problem is you can check the event log, but you can escape from this step.

And straight to stop other services on the same port so you can start the service you want to run. Problem: The TCP port is already in use. Stop the service running on the same port so you can start the service you need to run, try to start the service that you stopped earlier.

You will see that it is not running because the required port is already in use. Thank you for watching! Don't forget to like, comment, share and subscribe to my channel.

Can I disable WLAN AutoConfig?

Press on your keyboard the “W” button. Right click on the Wireless AutoConfig option you have on the left side panel. Left click on the “Properties” option you have in that menu. Left click on the “Stop” button under the “Services status” topic.

How do I enable WLAN AutoConfig in Windows 10?

Follow the below steps:
  1. Press Windows key + R from the Keyboard.
  2. Type services. msc and hit Enter.
  3. Search for the WLAN AutoConfig Service.
  4. Double click on the WLAN AutoConfig and click on Start button.
  5. Click on the dropdown list and set the Startup type to Automatic.

Is there a WLAN AutoConfig service in Windows 7?

It is strongly recommended that you have the WLANSVC service running if your computer has a WLAN adapter. WLAN AutoConfig is a Win32 service. In Windows 7 it won't be started if the user doesn't start it. When the WLAN AutoConfig service is started, it is running as LocalSystem in a shared process of svchost.exe.

What does WLAN AutoConfig error 1068 mean?

The WLAN AutoConfig error 1068 is one that occurs when your laptop or desktop can’t detect WiFi. Error 1068 returns the following error message: “Windows could not start the WLAN AutoConfig service on the local computer.

Do you need to enable wireless Autoconfig in Windows 10?

Generally, while using Miracast, which is a wireless connective technology, the Wireless Autoconfig service stops working properly. To use the Wireless Autoconfig service, you have to enable it again. If you don’t know how to enable Wireless Autoconfig service in your Windows 10 computer, then don’t worry.

How do I change the service settings on WLAN?

This is how you can adjust the WLAN AutoConfig service settings. First, press the Win key + R hotkey to open Run. Enter ‘services.msc’ in the Open text box, and press the OK button. Now scroll to the WLAN AutoConfig service listed on the window directly above. Double-click WLAN AutoConfig to open the window shown below.

Other Questions In This Category

Conhost.exe multiple instances - comprehensive reference

How do I hide OneDrive personally in Windows 10? I would like to explain that if you didn't want to sync OneDrive personal, I suggest you try the following step:Right click OneDrive icon.Click Settings.Select Unlink this PC under the account “OneDrive Personal”.

Taskeng.exe high cpu - practical solution

How do I fix Realtek Wireless Driver? Disabling and re-enabling the network adapter, in network settings in control panel, uninstalling the network adapter and reinstalling it in device manager, updating drivers, rolling back to previous versions of drivers, checking for any outstanding windows updates using an ethernet connection.

What is jmicron - listed questions and answers

Why does Windows 7 take so long to shutdown? This is usually because you have an open program that needs to save data. Halt the shutdown process by clicking Cancel and then make sure you've saved your data in all programs open. ... You can also try manually terminating the program with Task Manager before shutting down your system.