Home > FAQ > Qcamain10x64.sys blue screen - how to solve

Qcamain10x64.sys blue screen - how to solve

How do I fix Qcamain10x64?

Fix: BSOD Error Due to Qcamain10x64. sys (Qualcomm Atheros Driver)
  1. Remove the defective driver using the Device Manager.
  2. June 2021 Update:
  3. Install any pending Windows 10 updates (if any).
  4. Perform a Check Disk Run.

Manually you can do that again in many different ways in Device Manager - Device Manager, but we're going to show this way how we can click on the tab here like that and then you'll see this PC or a beep here whatever you called it that and Click on Manage Ok and this will open this box Computer Management, from there you can see the Device Manager and this one. I'm not a device manager ok another way to do that quickly I'm just showing quickly that the start button is right click here and you can look it up here and you'll see the device manager here so depending on how you want to go about it but it's both the same now when you're in here as you can see this is your machine here. What you're looking for now is graphics cards and graphics cards that you can see here, is it a graphics card? in this case but what to look for on your site is AMD or Nvidia and it will be your graphics card name here, okay now, you can uninstall it that way if you want or can use the method i can use You get into the properties area here, and you can see drivers too.

There is an option here to reset the driver. Is this another great way to try and get to an older version of the driving cases, problem like this? also but if you want i advise you to click install and remove it and then download the latest version before you do anything, okay? So first you want to get on the internet and let your driver surf as long as it's not completely blue screen as long as you can have these options to get on the internet and go to yours and then put a article in here, and then you can click on drivers and then you can get the latest drivers for you and the same for and they choose your graphics card, you will know what graphics you have and then you choose here and then you download the drivers ok, do a search and you you can download these drivers once you have the latest drivers in there Train your drivers now once you have your drivers you want to go into safe mode Now we have our driver ready on our desktop and what we're going to do is into safe mode Now, Windows 8 or Windows 8.1 is a little trickier as long as you can get us the desktop for a little bit.

While you can actually get into Safe Mode, here we go to the run by right-clicking the Start button. Enter Ms. Config here.

Just like me here click ok and once you are in here going to the boot tab here on the boot tab there should be a couple of boot options here. When you are finished with this you will need to remove this, but this will allow you to go straight to Safe Mode and apply Boost Ok and apply and ok and then restart the system Okay so let's let that load Now here we are to the Safe Mode option and what we want to do here is whether you do it that way. I would recommend uninstalling the display driver.

This is a great program for getting rid of all of those leftover display drivers. Click that OK, and when you have the display and installation you can see that it's short for DDU and We. Picked it up at AMD at the moment, depending on whether you have an amdgraphics driver award or Nvidia, you would pick which one you want when you did that.

OK. You can remove the area here, which is what I would advise you because these remains here are going to have all of these foals so you want you to get rid of it all. Tick ​​this box to see AMD or the C NVIdia folder that will have all of those dots files in it.

You want to get rid of all that stuff and replace it with a brand new graphics driver, okay? So depending on whether it's on AMD or or that's what you need to do here then click this clean and reboot at the top, which is highly recommended that you now uninstall everything and remove any leftovers from this computer, do that when you're done Can you reinstall your downloaded driver Rebuild a system and you should be fine? Well before you go back to the desktop. You need to get into the run area here, so right click on the start button type in an msCOnfig and go back to that boot tab and then uncheck the safe boot box under the boot tab okrestart, and should be back on a Be desktop. You can run your new driver if you want, but once you've done that you can look it up in your Device Manager.

And you should reinstall this driver now. Hopefully this will fix your blue screen problem. Now monitor it and see what happens and see how it goes for the blue screens now.

Go away fix it, if you're still having problems after that then there's something creepier, OK, if you're overclocking your graphics card, you'd like us to drop this down to the default and not overclock until you diagnose the problem. OK? If after that you are still having problems it is time to check for hardware issues, it could be your graphics cards could be failing memory problems could be all sorts of things like But these are the first steps you want to do so you can do this Eliminate any blue screen issues, okay? Anyway, I'll wrap this up here. My name is Brian from Bright Tech Computer Code, okay? If you like these articles, then press the thumbs up, it really helps me and press the subscribe button too if you want to stay up to date when I upload new articles.

If you have problems with your computers you can always check mine Go forums and post there and we can help you there, or if you have any questions or want to contact me then you are at the right place in the forums and the information at the top of the screen,? Anyway, have a good day and see you again in the next article. See you soon

error code 7135

What is Qcamain10x64 Sys?

sys is a problematic wireless LAN driver. Qualcomm Atheros Extensible Wireless LAN device driver and Killer Wireless 1535 are the most common reported drivers known to cause this issue, but there are certainly more.

How do I fix watchdog Sys blue screen?

Reinstall the Graphics Card Driver. To fix the watchdog. sys BSOD, you can try reinstalling the graphics card drivers.

- So maybe you've tried the guide on how to fix your blue screens of death, you've tried swapping memory sticks, and you've tried changing the power supply. Okay, some of these may actually fix your problems, but if you're still having those blue screens of death then today we're going to go over some of the weirdest problems I've encountered since I started building PCs, and of course, how You can fix these problems. (upbeat music) Welcome back to Tech Yes City, and the first issue we'll address is underrated defaults.

This one can straighten up more than you'd think, especially in 2018, when AMD and Intel are fortunately wrapping up as much as possible on their CPUs, especially if consumer CPUs like the Ryzen 2000 series and also the i7 series are to be discussed . These have been clocked out-of-the-box more aggressively to the point where they have potentially diminishing returns. Cases where a power supply is a budget that may have long amounts of ripple, which is an entire issue in itself basically fluctuating voltage levels which in certain cases can fall below the standard voltage specification, which will shield your computer in blue, along with a budget motherboard that will most likely be used with a lackluster VRM, which is a voltage regulator that draws power directly from your power supply and then converts it to power your processor can use.

All of this can lead to a situation where your central unit may no longer have enough voltage to run even with the default settings. To fix this, just go into the BiOS, so hit the delete or F2 key when your computer boots and when your computer allows it, which on most modern motherboards is the hardware with non-turbo settings boots so don't crash before you get it into the BiOS, and then just go to the part where your CPU voltage settings are after that and then just hit the plus or minus button on your numeric keypad and try increase these over the default ettings.Voila, you may be able to say goodbye to those blue screens.

But before we move on to problem number two, when you visit a lot of different websites that you visit and you might want a different level of passwords for websites ranging from websites you don't trust at all to websites that are your own If you have bank details, today's article sponsor LastPass can help you a lot. I constantly visit websites that are not that important to me personally, but I enjoy reading, news and forums for example, and many of them require usernames and passwords that you will all happily forget. If you don't want to forget about it, LastPass can automatically generate unique passwords for every website you visit. and save it on a secure cloud and auto fill in these websites to make your life so much easier.

I have been using this service for a while now and it has avoided a lot of headaches, and an added benefit is that you can have all of those secure e passwords for these sites that you and your trusted friends share. For example, an NVIDIA NDA login account for driver downloads, then you can easily share a password with other LastPass users and know exactly who you've shared it with. They also don't know what exactly the password was used.

So if you feel like you don't want to share the account anymore, then you can just cut them off. And this service is completely free, links in the description below. Number two, hibernation.

Computers often go into hibernation, and the Windows default settings allow the computer to go into a mode called hibernation, in which the computer is in a state of minimal power consumption and ready to come to life as soon as you press a key There are other settings like USB ports and PCIe slots on your motherboard that can also be disabled, although this can get a bit tricky. Some budget power supplies don't really support the low power states, to power the CPU when in this mode, the computer does not wake up after you press a key. This may wake up its ugly head especially after the introduction of the fourth generation Intel CPUs i.e.

CPUs like i7-4770, i5-4670K, i5. - 6400 etc. where Intel introduced this power saving mode called C7.

To work around this issue and prevent it from becoming a problem, you can do one of two things, either go into the bios and set your minimum C-state to C3, or if you are using a laptop I recommend C6 to the Saving energy, which I always do, or you can switch to Windows, or of course you can do both, which I do on my desktop computer. X79 God bless, and in the power settings you can put your computer in high performance mode. Here you can also change selective suspend settings and PCIe power states.

And in general, this just helps make a super fast machine, all of which is, of course, higher power consumption. So if you are using a laptop be careful, you might just want to get started with h C6 in BiOS and call it a day. And of course, if you run out of those BSoDs or Freeze then you can call it a day.

Number three, faulty memory modules. This is so hard to diagnose because sometimes it's so completely random and it can pass some of the diagnostic tests and then bam, all of a sudden you jump with a blue screen or a program crash for no reason or in rare cases through the screen problems, the best way is To run MemTest86 Plus and keep it running for a few hours. Going through all of the tests puts a heavy load on the memory and if the memory has a bug it will usually come out in this stress test that didn't give me either a false positive or a false negative result.

To get this program working just download it, create a bootable USB, and then boot into MemTest86 and you're good to go I don't have a lot of time and you don't want to make this bootable and you don't If If you don't want to use MemTest86 you can try using only one memory stick at a time, or if you only have one memory stick in your computer you can try swapping that out for a different memory stick because in my time building PCs I've never had two memory sticks that broke at exactly the same time, and I've built a lot of computers so this is rare. If this ever happened you are like one of those who won the lottery, but in a negative way. Anyway, if you find yourself having a memory problem with your computer then you should stop freezing or have blue screens.

Number four is hardware incompatibility. This can sometimes happen when RAM doesn't work with a particular motherboard, or simply, in which case it is very strange to use a cheaper chipset license, such as an H61 versus a Z68 motherboard or an H110 -Motherboard compared to a Z170. I've found that some budget motherboards just don't have the ability to boot two different DDR3 memory modules, I'm from different manufacturers at the same time.

If this is indeed the problem I would suggest trying just one memory stick at a time and of course just trying the situation and wanting to get a different memory stick or motherboard, as unfortunately some problems like this are simply unavoidable and incurable. Another common problem is using a PCI or PCIe wireless adapter and the drivers don't just install and when you install install they just give you a BSoD, like in the past, I have a D-Link radio module and when I turned on the computer it worked before I installed the module but then as soon as I got into Windows, bang, BSoD, this can cause a lot of frustrations, and in this case when you buy a new piece of hardware and this happens just return it to the store and get a refund and try another brand of product. Ultimately, for consumers, and we shouldn't be used as beta testers, it can cause some serious headaches.

Although more hardware incompatibility issues can arise from things like sound cards. Just like the wireless modules can cause some problems, even on Windows 7, but then when you upgrade to Windows 10, bang, stops working. Same thing, save yourself the headache and get rid of this problematic part of your life.

And if you walk in with number five, it is a faulty or non-overwhelming power supply. This is very, very difficult to diagnose at times, and in fact, it has rarely come up since I started building computers. Mind you, I don't use junk power supplies, and I've been building and tinkering for a long time, but that doesn't mean it can.

It can't and it can happen. Basically the problem here is that if the power supply is broken, your computer may either simply not boot, or it may go into a blue screen, or it may simply freeze, and other issues that may arise, such as good thing your computer seems to be fine, but there's that weird smell of burning, and it's not the smell of freshly opened hardware, that's different. It is a smell that just lingers and gets into your nose.

If you smell this smell, ladies and gentlemen, do yourself a favor, hold on, shut down your PC immediately, find the source of the smell and remove that part ASAP. Not only does this apply to the power supply but also to other components in your system, although 99% of the time there was a strange smell coming from your PC from a power adapter, that's just my experience. So always get all of your pc components a power supply that is slightly better than the cheapest junk they sell, from a brand you've never heard of in Australia the promised land and you have a limited one Budget, even a PSU like a Corsair VS350 is going to be miles better than an unnamed 680 watt PSU that will most likely sizzle in due course not only to take itself with it, but to take other hardware with it, or even your whole house.

Don't risk it, just like those seedy sellers from Gumtree or Facebook. And the final problem with power supplies is of course the power supply. Some people buy cheap 500 watt power supplies thinking they could power all their GTX 1070s, okay, and then when they start a game and find that their computer just shuts down, it's because that 500 watts -Power supply, just like mentioned above, is junk.

You will generally have to spend some decent money on a PSU if you're reinstalling medium to high-end components into a build. If you need to find some decent power supplies, I'll put some links in the description below. But for most people, a solid 650 watt power supply will have you covered for years.

restore email icon

Come on, and it won't break the bank, and it will be able to be ported from any PC you build, whatever means you can reuse it button. Let me know in the comment section below what are the weirdest Pr issues you've gotten into when it comes to blue screens, freezes, or issues that can come up with building PCs. As always, enjoy reading your thoughts and opinions, and I'll catch you in another tech article soon.

Don't forget to check out today's article sponsor LastPass, which you can try completely free, the links in the description below, and I'll catch you in the next one.

How do I check my blue screen error?

To do this:
  1. Select Windows Logs on the left side of the window.
  2. You will see a number of sub-categories. Selecting any of these categories will bring up a series of event logs in the center of the screen.
  3. Any BSOD errors are listed as “Error”.
  4. Double click any found errors to investigate.

Other Questions In This Category

Microsoft edge complaints - practical solutions

Does Windows 10 have cloning software? The best solution I have found for cloning and restoring a Windows 10 installation is the free EaseUs Todo Backup. EaseUs Todo Backup can not only restore a backup of your Windows 10 installation, but it can also do so to a non-corresponding partition layout. You can download a free copy here.

Sqm telemetry microsoft - practical solution

Can you still use Microsoft band? Will I still be able to use my Microsoft Band? Yes, but functionality will be limited to what's available on the Band device. Capabilities provided by the cloud or the phone app will no longer function.31 mei 2019

Microsoft refund scams - answering the questions

What can you do if you get scammed by Microsoft? What to do if information has been given to a tech support personUninstall applications that scammers asked to be install. ... Run a full scan with Microsoft Defender Antivirus to remove any malware. ... Change passwords.Call your credit card provider to reverse the charges, if you have already paid.