Home > FAQ > Mic tray icon - workable solutions

Mic tray icon - workable solutions

What is MIC tray?

The genuine MicTray64.exe file is a software component of Conexant SmartAudio II by Conexant. Conexant SmartAudio II is a driver interface that lets users control program settings related to Conexant audio chipsets. The program allows the customisability of certain aspects of the installed audio hardware.

Greetings Earthlings, welcome back to another episode of the FAQ series today, we're going to discuss one of the most important aspects of your recording, how to get the gain or level of your microphones right, so I'll try to keep this article as short as possible, so if you just want a very short answer and set your gain so that you hit between minus 12 and minus 6 decibels, but if you want to know more keep watching the article and I'll break it down into three separate parts is the reinforcement? How do you hire your reinforcements? How does amplification affect your sound? I'll also read a little further below if you want to learn more about mic and preamp gain Part 1 What is gain is essentially how much do you gain or raise the level of your microphone output signal, and do you do this? because microphone output signals are insanely quiet, ranging from minus 30 to minus 70 decibels, and that has to be increased to get it to a level that y you can actually work with and that's exactly why we have preamps and just to make those preamps clearer can they be supplied as stand-alone units like this one or they can be built into USB audio interfaces like this type, for example if you have a preamplifier with a gain range of +6. have up to plus 66 decibels which means the least amount of amplification you can get your signal is +6 and the largest amount that you can amplify your mic output is 66 decibels and that pretty much covers what amplification is and what it does me know it wasn't an exhaustive explanation but it does give you a general part two on how to adjust your gain and before I answer I want to address a question that I get all the time and that question is what is the best gain setting for that preamp or usb mic, and there just isn't an absolute answer here because there are several variables to consider when adjusting the gain of your preamp and we're going to cover those of course now ctor is volume the sound source and in this case my voice is the sound source.

So if I speak very softly I would have to increase the gain on the preamp or if you are recording a very loud guitar amplifier you will have to set your gain significantly lower the second factor is the distance between the sound source and the microphone, so I am in at the moment a reasonable distance, but if I were far away I would be a lot quieter and would have to increase the gain on the preamp, if I was much closer I might have to consider decreasing the gain on the preamp so depending on the distance between the sound source and the preamp you need to adjust your gain accordingly to the microphone and the third factor is the sensitivity or the output level of a microphone. So if you have a quieter mic like a dynamic or ribbon you will need significantly more gain, but if you are using a standard condenser microphone that usually has higher outputs you will need lower gain so now you know what factors Affecting the amount of gain I've heard many different opinions on this subject. I've heard some people say you have to record at minus 18 DB and others say you have to record at minus 6 DBand when I say you record at minus 18 or minus 12 or minus 6, there are your peaks the loudest part of what you're recording should reach this level and that's why you record with this method to gain headroom and what that is is the difference between the loudest part of your recording and 0 decibels where you start clipping distort and ultimately ruin the recording, but on the other hand, if I were to set my gain too high, so that I hit around minus 1 decibel, I would have to be very consistent in my tone in my speaking volume to avoid level peaks and clipping and distortion of the recording.

I think it depends on how dynamic the sound source of your recording is and what I mean by that, how much variability and volume a sound source has with all of that? Like I said, I'll go ahead now and show you how to adjust your gain. I'm currently running the BP 40 straight into the - me - 2nd generation on the screen right here you can see I got Logic Pro X working as the Focusrite doesn't have a propriety meter, I just use the meter on Logic Pro and as you can see at normal speaking volume I hit minus 14 minus 11 decibels and in case you don't know where to find pretty much every piece of recording software or DAW that has come up in the last decade has one built in, but if she has a volume control, make sure this slider here is set to unity gain or zero decibels so it doesn't affect the R. If you come back now we are going to reduce the gain of the preamp to zero and just slowly increase it, as I speak into it to show you what I would be looking for if I were to adjust my gain to increase it like you are on can see my meter minus twenty nine decibels minus twenty five minus 20 minus 20 minus 17 minus 14 since we've hit a negative point seven so let's go ahead and roll it back a little and let's go and clear the meter so we can see what we actually meet now and when I hit around minus eleven and that gives me a lot of headroom when I get even more excited and shout a lot of headroom into the microphone to play around and that's how I set my game Part 3 How does gain affect your sound and me? I'm not going to sit here at Waxpoetic about this color scheme being added to your recording by driving your preamp tube, man I won't, I'm just going to talk about the measurable and really noticeable impact on your sound, so the first and most prominent one Impaktor I came across online is from people who set their gain too high and that ultimately leads to you overdriving and when you record digital it's just terrible and it will ruin your recordings gain too high, so I beat around minus a decibel which is fine when I speak normally, but then when I get excited it starts cutting and distorting and sounds awful and once that's recorded in your audio there's next to nothing you can do to save that so are you going to have it either? to deal with a terrible sounding recording or you just have to go ahead and re-record it and the second influence that I come across a lot less comes from people who turn their preamp gain too low and what that does is if you do Have a sub-par preamp, the sound source you are The recording may now get messed up or get lost in the noise floor of this preamp.

Here's an example where I picked up the signal too low and my peaks are when I hit around a negative 30 decibels, it means I have to go through the post and increase that 30 decibels to get a decent listening level, and the problem with this is that not only do I amplify the microphone or the sound source it is picking up, but also the noise floor that is inherent in the preamp and to show you the real flaw here I will shut up to let you down and now I can really drive the point home I've set my gain correctly so that I'm around minus 12 minus 9 decibels on my meter I know this gives me a lot of headroom personally and it gives me a pretty good signal on the noise ratio and to illustrate that I will go ahead and shut up so you can hear the noise level well. I think that's enough for today guys found this article helpful and I hope to hear a lot less clipping and a lot less noise on all of the recordings. Also, let me know in the comments below if there are any topics I should cover in the future.

If you've found it helpful, go ahead and give me a thumbs up, if you hated it, thumbs down if you like more articles like this, click on the logo below me, also look at the Discord server link in the description and I'll see you all later thanks for looking bye

How do I get a microphone icon to display on the system tray?

A microphone icon will be displayed in the notification area of the taskbar. This indicator can be turned on or off by going to Start > Settings > Personalization > Taskbar and choosing Select which icons appear on the taskbar.

A lot of people have said these methods they are a 50-50, if it works or worse it doesn't, as far as that goes let's go into the simplified method and hopefully it works there, if not then we can go to a bit more events are going so what do we have to do? Go to the start button in the system tray and go to the settings good system, go to notifications and actions and from there, like mine, the audio icon didn't appear so I would go to the system icons on or off turn off and wait for it to load, then from here I just turn it on when it's off now.

One thing you will notice is that some of these may be grayed out and it could be because I have a desktop for example and the power option is useless because desktops are supposed to have batteries on my or at least no batteries so yeah and the thing I said before the volume was grayed out and I'm going to show you how to fix that so that something should appear, but is greyed out for some reason and make sure everything that needs to be shown is shown again here. There is a chance that something is not showing up here at all and hopefully the next method will be able to fix it, so we'll be closing the settings. One thing I want to mention before we go through this is about getting to the point of no going back so save any document or anything you have critical for when the next step doesn't work for you, such as if your system tray has stopped working you have to restart your restart computer for this to work again, so go to the system tray and right click and go to totask manager, or you can go to Control, Delete and select Task Manager from there, what we want to do is go all the way down to the bottom of the Process tab and then find Windows Explorer.

I have a file icon next to it, it should be under the process and what we want to do is right click it and select in the task. Now you will see your background change the system tray is no longer I'll be there in a couple of hours so this is again the point of no going back. So what we want to do is open a file, run a new task and type dot exe in Explorer, then select the option to create this task with the ministry's permissions and press OK from there, back to normal with your background should be back to normal and your system tray should load.

It may take a few seconds so keep it online but if it takes a while it won't be uncomfortable then you may just have to do a pretty nice start up your computer. One thing is if the thing doesn't load like a convenient mountain, suck the start button and maybe you won't see the load by selecting something at a task party, it will now all show what we are, what to do is an or two things, you can go back to settings, three old method, or we can right click on the taskbar's good features and then select the custis eyes next to the notification area and now we take it right where we need it let's close that and then this area that appears in the settings area that we want to go to to toggle the system icons on or off. Pick what is needed and the other, now there is a chance that happened to me once you restart explorer just like I told you what could happen is that the icons could just pop up and automatically this happened to me and this is something to keep in mind but again, this doesn't work for everyone if this doesn't work I really don't have any other solutions right now before we have to ask because maybe I can do something different in the future or maybe a viewer or listener can answer your question and point out a direction that I can 'I didn't really think about it or know about it, but it got to the point where it was issued or found on our tech news and when If you like this then please leave a Like Subscribe and join us on the Patreon to keep this stuff going and see you next a sc have fun

Why do I have a microphone icon on my screen?

By default, Android won't notify you if the camera or mic is recording. This free app asks permission to access your camera and mic and will show an icon just like iOS does in the upper-right corner of your screen.

Join Me is the easiest, instant online tool for productive meetings and ad hoc collaboration.I am here to show you how to join to join a meeting so the next time someone says that you can get started Joining them with me, joining a meeting is a breeze, no downloads or registrations required, and no complicated dial numbers - the most popular way to join a meeting is by email or calendar invitation.

Just click the embedded link and you will immediately be directed to the meeting via your browser or the Join me desktop app you have it or you can join directly from the Join Me home page Go to join point means enter the Meeting code, either nine digits or a personalized code given to you by the meeting organizer, enter it in the join box and press the button, you will be instantly excited in the meeting, if the meeting is locked, it means That the moderator just needs to type your name and then tap to join the meeting using the controls above and your on-screen controls below.More about this later you can connect your audio and article on your toolbar.You will see a phone button that shows your options for audio have two options to connect over the internet or by phone if you want to call over the Internet You will see the controls for your microphone and speaker settings Make sure the correct microphone and speaker are selected, then click Call to dial in You can also dial in by phone You will see your personal dialing information, you and yours Meeting attendees use to connect to the call and your meeting attendees have a number of regions to choose from.Select the region that works best for you.

You can choose to have your audio settings saved by checking the box in your audio menu. During your meeting, you can quickly mute your line using the microphone button on the toolbar when that button is ready Our line is muted also has a simple article conferencing feature that you can use in any meeting to start your article by clicking the article button on the top left in your toolbar will connect to your article camera and you will see a preview of yourself on the article screen.If you want to dial into the audio through your computer, check the box with audio when you dial in by phone Let this Checkbox unchecked It may cause an echo If you choose both ways click Connect to initiate your article connection Your article bubble will appear in your meeting Join as others join by article You will see their article bubbles pop up You will need to share your screen or windows During your meeting, the bubbles will automatically shrink and move away.

When you start sharing, you can move the bubbles anywhere on the screen, just click on a article bubble and drag it to the best location for you on your meeting toolbar.This will give you the names of everyone in the meeting displayed. The check mark button on your toolbar gives you another way to communicate in your meeting Everyone in your meeting or just to one person the last green button is the More button where you can find advanced collaboration features that you can request that your hosts give you control or mouse control, when you are in control, the conference participants are notified and your hosts can take them back from you.You can also request comments at any time.Allow all participants in the meeting to share a document in various ways Highlight your color by clicking the green circle button take a screenshot, to save the annotations in your Mesnapshots join folder, to access your screenshots, just click the folder Your Screen Controls at the bottom right of the meeting will be notified gt that you left and that is the basics of attending a meeting with me thank you for participating If you have any questions about anything I covered today, check out additional articles and articles on WWLP

How do I get a microphone icon to display on the system tray?

Replies (7)  1 Replies (7)  #1. Click on Windows button and click on Settings (gear icon) 2 2. Click on personalization and click on Taskbar 3 3. Click on Turn System Icons on or off and make sure that the Microphone is toggled to ON.

Is there a microphone icon on the taskbar?

You can follow the question or vote as helpful, but you cannot reply to this thread. There is not a microphone icon for the taskbar (never has been). That's a great idea though, and I'd ask you to suggest it in the Feedback Hub (the Feedback Hub app is built-in to your computer, just find it using the search box).

Is the speaker icon on the system tray useful?

I find the speaker icon on the system tray very useful - it tells me if the speaker is on or off. I would like something similar for my (internal laptop) microphone - I would like to know if it is on or off, as I would hate for it to be on without realizing it.

Where does the mictray go in Windows 10?

If the logfile does not exist or the setting is not yet available in Windows registry, all keystrokes are passed to the OutputDebugString API, which enables any process in the current user-context to capture keystrokes without exposing malicious behavior.

Other Questions In This Category

What is wpsystem - lasting solutions

How do I fix an unresponsive external hard drive? Select Properties, then click on the Power Management tab.Check external hdd for “allow save power” mark to solve the not working error.Update external hdd to solve the not responding error.Use Disk Management to solve the not working external hdd.

Windowsapps folder cleanup - practical solutions

Is defender Pro a scam? These Windows Defender Pro alerts are designed to scare you into thinking that your computer is infected so that you will call the number listed in the fake security alert. ... This is a complete scam and you should not purchase anything from numbers listed in alerts.

Device manager symbols - a solution to

Is Microsoft Office free for nonprofits? Get Microsoft 365 Business Premium free Securely run and grow your nonprofit with an integrated solution purpose built for small and midsized organizations.