Home > FAQ > Intel recertification service - a solution to

Intel recertification service - a solution to

What is IntelPTTEKRecertification EXE?

IntelPTTEKRecertification.exe is part of Intel(R) PTT EK Recertification Service and developed by Intel(R) Corporation according to the IntelPTTEKRecertification.exe version information. IntelPTTEKRecertification.exe is usually located in the 'C:\Program Files\Intel\iCLS Client\' folder.

Hello, this is a tape from Microsoft.

I will show you how you can diagnose high CPU problems under Windows Vista 7 Server 2008 and 2008 r2 with the Windows Performance Toolkit, also known as an expert, the CPUs here some low maybe moderate maybe 100 percent utilization of these CPUs The task manager enables you to drill here and see it's this application and it's some time here We have one of our cores busy at all times, so where do you go from here? You can right click to create some dump files, but there is an easier way to bring the expert over to you to familiarize yourself with the process and get information like this very extensive functional-level detail that I can see in this case can that each CPU calls the function one, two, three, four, five and six and with this call at ends get tick count and I do that in a loop that uses up most of my CPU time. How do we get to this level of detail? Install this toolkit via the Windowsseven SDK, what that will do is turn up the web installer which is easiest but just install these components with the installer in your bin directory here so I'm up for that case the next 64 machine so I want to install the x64 tools to get started, just launch an administrative command prompt and while we're sure our CPU is still happening we want to go ahead and run this Latencystack Walk command wizard Profiles. If you get a warning here about disabling the paging executive, you can also enable in the registry for x64 machines that the registry value must be set correctly and started, but if you are? Worry about losing your reproduction of the problem, collect the trail anyway and I'll show you what's going to be there besides the ck-traces and it might still help, so let's let this go for a while, let's go ahead and stop the trace, save it from Expert - Dhigh CPU ETL which will only take a second to write that we have a little warning here about personally identifiable information that will look like a file, paths, etc.

So go ahead don't worry, it shouldn't be that bad but we have to warn you there so have a good look at the trail You can use any Vista or higher machine to view the trail, it just needs to have an internet connection for us our icon resolution can do, but essentially that's all you need, in other words, you can capture the trace on one computer and view it on the other. No problem, so mentioning something about symbols I should show you here that my symbol path is set to the public symbol server Symbol path is the environment variable I have a local symbol path for a replication application and I have the symbol server caching the local web symbols directory here, so let's start with wi the analytics expert ICP you ETL it will warn you if you start from an admin prompt just click yes everything now here is my interesting level of detail here from the expert i can already see i have a specific one Process that each uses a large part of my CPU CPU exe CPU-Samplingby CPU is the relevant part that we want to go into here. Now let's right click on Loadsymbols.

This may take a while as your symbol path may not be completely filled Right click on the view, right click on the summary table. Now that our summary table is rendered, here you can see that we have a list of processes that may not have the stack column turned on by default, if you don't appear in two columns here and check it out, you probably have a module and function and put Make sure you are sorted by weight so as I mentioned earlier you may not have good stack traces here like I have because you may have had to put a paging executive off and didn't do that, that's one Reason but you can still get information here as I have a module and a function here, as I have solved icons, that I get functional level details that might still be enough to mark your top consumer CPU for one certain process, if you didn't have any symbols for this stack, another reason might have been that you didn't have any symbols Maybe it's not a microsoft binary, maybe it's a third party function and a third party dll so you would just see the name of it like each CPU and then you might see a question mark or nothing here but that's ok what to do with this information now you can start searching go to bingcom enter these dll names these executable names will tell you more about whether other users have seen this issue stack traces have been captured Microsoft KB article This really can give you the information that you need to fix this instead of just having the process name so why does it matter? Maybe you don't have an example as simple as a discrete executable like Meat CPU Dot exe that you can easily find who this executable came from, maybe it's one of your SVC hosts on your computer, the CPU and many services for example consumed? are housed there, it could be non-Microsoft third-party services or it could be a Microsoft grouping of services so this is where you really want to dive in and what you need to do is the stack. Thank you for watching and good luck with your investigation

Is there any way to fix Intel pttek recertification service?

The Intel PTTEK Recertification Service is using nearly 40% CPU all of the time on my Acer Aspire E5-575G. It's really lagging my system. Is there anything I can do to fix this? -In Programs and Features, uninstall Intel Trusted Execution Engine. -Navigate through the folder to the InstallersTXEIWin10 folder.

Why is Intel PTT Ek recertification service high CPU usage?

Intel (R) PTT EK Recertification Service High CPU usage. Yesterday I turn off secure boot to fix that my usb bootable not detected and I restarted and I go to the bios again to change boot option to usb and my USB bootable is working property.

Why do I get PTT Ek recertification service?

As soon as it boots you can hear the fan going full speed. At the top of CPU usage I always get Intel PTT EK Recertification Service process at around 25-30% constant. The UEFI is set to PTT instead of TPM1.2, but this seems like a software issue. Currently I kill the service from the Task Manager, but I think this causes some issues.

When does intelpttekrecertification start on my PC?

Once that is done everything works fine. The IntelPTTEKRecertification text file on my PC shows a connection error: '2017-12-19 09:42:13:389 00000000000026ac IntelPTTEKRecertification: EK recertification started.

Other Questions In This Category

R-sf.html - simple answers to questions

Why can't I find BitLocker on my computer? In Control Panel, select System and Security, and then under BitLocker Drive Encryption, select Manage BitLocker. Note: You'll only see this option if BitLocker is available for your device. It isn't available on Windows 10 Home edition. Select Turn on BitLocker and then follow the instructions.

Deactivate office 2007 - pragmatic solutions

How do I stop Norton from restarting my computer? Stop Norton Antivirus startup through the msconfig window.Go to start button and click on “run” dialog box.Type “msconfig” in the box one more time. Go to the “startup” tab. ( ... Among those various programs, search for “Norton Antivirus” program.And when you find it, uncheck the box and click “apply”.

Kinect turns off - how to decide

How do I get my laptop to stop hibernating? SleepOpen up Power Options in the Control Panel. In Windows 10 you can get there from right clicking on the start menu and going to Power Options.Click change plan settings next to your current power plan.Change 'Put the computer to sleep' to never.Click 'Save Changes'