Home > FAQ > Dcom configuration warning - the ultimate guide

Dcom configuration warning - the ultimate guide

What is DCOM configuration?

DCOM is a Microsoft technology and it stands for Distributed Component Object Model. It is used for RPC (Remote Procedure Call) systems to enable communication between COM-based applications over the network.

Let's get to the fourth step and the first three steps we have taken is to postpone Windows security altogether, we will set up mutual meter recognition on all PCs that will be using OPC communication, and in step number three we will configure actually the system-wide decom settings that the entire computer this time we are going to configure the server-specific decom settings, so we have to do this for every OPC server that we will actually use again in our system you have to go to the start button on the Start On the Windows Start button from there select the Run menu option and enter decom Cand FG decom config. Once you do this, you will be returned to the Component Services window.You may be ready to follow us from Step 3 right here, and then from the console route to Component Services and Computers, navigate down to my computer as soon as you open my computer , you will see several folders there and specifically click on Decom configuration, so click on in the decomconfig folder and the note is actually different than in the run dialog it says it is definitely about the D-comb configuration What we do is going to do is take a look at the list of servers to find our server in this case it is the kept we are servers that I ponder but click and right click and select the properties options, select the properties option from there and you'll be greeted with a brand new dialog box, so let's start with these server properties and we'll throw you in e Looking at the General tab and here we can see that the authentication level is set to Standard.

Remember that we set up step number three and the system-wide settings so make sure this box is checked so that you can choose a different option in other decompression applications, but for OPC specifically, this is the option we normally use the second you want urity-Tab just use the default setting that we set up in the system-wide configuration so that no changes are required here. Next we click on the Endpoints tab and again you will see the default system logs which you don't need to change From the default from here we go to the 'Identity' tab Now the 'Identity' tab may look like one of two things, like See you here. On the left we have the interactive user, the starting user and this user who are activated, everything else is deactivated and on the right the y user is activated and the system account is activated, and that's because on the left we have a normal Windows Application, while we're actually configuring a Windows service on the right, and we'll talk more about it in the next few minutes, talk about how the various users interact with the user, this user, and the system account, and we'll talk about the implications of each and every one and remind us if you choose the identity incorrectly I can guarantee you will encounter some OBC issues that can be some headache for you anyway

How do I enable DCOM?

To enable or disable DCOM
  1. Open Component Services.
  2. In the console tree, click the Computers folder, right-click the computer for which you want to enable or disable DCOM, and then click Properties.
  3. Click the Default Properties tab.
  4. To enable DCOM, select the Enable Distributed COM on this computer check box. ...
  5. Click OK.

Why is DCOM configuration warning not working in Windows 10?

Answering the question you were asked in the positive should cause the corresponding AppID to be created with default settings. However, I found that in some cases this doesn't work, most likely due to a permissions issue (couldn't be bothered to research this).

How to set up DCOM in Windows 7?

DCOM needs to be configured properly in order to allow users to establish remote communications between their OPC client and server components. In this document, we describe the necessary steps to get DCOM working properly under Windows Seven in a Workgroup configuration. 2. Machines Configuration 2.1. Install OPC Core Components

Where can I find the DCOM error 10016 error message?

The DCOM Error 10016 error message in the Event Viewer contains information regarding the specific application or process creating the issue. Input event viewer in your Start Menu search bar and select the Best Match. Head to Windows Logs > System and locate your most recent DCOM Error 10016. Double-click the error message to expand it.

How to add an exception to a DCOM rule?

To add an exception, please proceed to the following steps: 1. Go to Control Panel System and Security Windows Firewall 2. Check the status of the firewall, in case it is enabled, continue with the following steps. Otherwise, you can skip this section. 3. Right click on “Inbound Rule” 4. Click on “New Rule” DCOM Configuration Guidelines

Other Questions In This Category

What is wpsystem - lasting solutions

How do I fix an unresponsive external hard drive? Select Properties, then click on the Power Management tab.Check external hdd for “allow save power” mark to solve the not working error.Update external hdd to solve the not responding error.Use Disk Management to solve the not working external hdd.

Windowsapps folder cleanup - practical solutions

Is defender Pro a scam? These Windows Defender Pro alerts are designed to scare you into thinking that your computer is infected so that you will call the number listed in the fake security alert. ... This is a complete scam and you should not purchase anything from numbers listed in alerts.

Device manager symbols - a solution to

Is Microsoft Office free for nonprofits? Get Microsoft 365 Business Premium free Securely run and grow your nonprofit with an integrated solution purpose built for small and midsized organizations.