Cmd.exe no disk - typical answers and questions
How do you solve There is no disk in the drive?
- Log on to the computer as Administrator.
- Insert a disk in the removable drive.
- Click Start, right-click My Computer, and then click Manage.
- Click Disk Management.
- Right-click the partition, logical drive, or volume that you want to change, and then click Change Drive Letter and Paths.
So I got this Philips device, it's an inexpensive home theater setup from years ago.
They gave it to me, someone gave it to me either to get it to work or parts or something. It was standing around and I needed a radio for the store. I thought well maybe I can get this to work but since it was standing around and had some mold on the board and it didn't actually light it up, the controls in the front didn't work.
The display wasn't working So I put a little too much work into getting it to work Hi see, after getting everything up and running the DVD / CD drive doesn't work now which is pretty common on an old CD player is. So if you have an old CD player that just won't read discs anymore I'll show you how to hopefully get it working. You will see it will be something like this.
Another problem is that the mechanism is now blocked, which I also need to fix It's a rabbit hole, yes it doesn't even try, we're trying to fix that Ok closer. LookIt is good to know what you are seeing. This is just the motherboard.
It's got the amp, it's all the logical stuff. This is the sound chip Obviously the floppy disk drive This is the power supply you want to stay away from In general, you want to discharge all the capacitors that these things are? For that you're going to stay away from her so it should be fine and they have this whole protective thing about it and make sure it's not plugged in. So what I've done, and every CD player, every DVD player will be different, but just give me more space for this one.
I open the drawer and then pull the plug to give me more space. That won't get in the way, so I don't have to disassemble the whole thing to take out the drawer; clean the laser first. All you need is a clean Q-tip.
No need to wet it, just clean it gently. I already did that. I know this doesn't work for me.
It's clean, but you can then insert a disc and see if that solves the problem. If so, unbutton it, but I know this is not the case. Let's flip it over on the back of the laser or the back of the reader.
Back here. Now you will notice that there is that little excuse, little ribbon cable. Take those little clips and pull the other way is kind of fragile so just be careful again, this isn't plugged in and that makes that out of the way Okay, and on the back of the board you're gonna notice it's those two little trimmers- Pots there.
These little guys adjust the amount of current that goes to the laser diode the way they set it up, one for the DVD part and one for the CD part. So what are there two things you can do to get a multimeter, there are two posts at the bottom of each and one post in the middle you put the multimeter in ohms, measure from the top and bottom, right? That way you figure out what it was originally set to and you turn it very slightly clockwise and then try again.If you don't have a multimeter you can do it, I think you could say the redneck way and that is a fine sharpie and draw a line on it The problem is that these things are very real? tiny.
Makes it really hard. That's what we're going to try. The thing is, if you go too far you'll burn it out, and the reason for that is a point of reference if you ever have to go back to how it was.
That's your record, but the thing is, it doesn't work the way it is, so if you burn it out who cares! It's way too early, I have to find a screwdriver that goes with it. Now if you can find a screwdriver that is small enough you can use it to make the adjustment. Otherwise I only use a small blade that is big, but it has a pretty fine point.
Just put it there, you can feel where it goes, My fingers I believe so you can see them and you will just twist them, I mean, it's going to be just a hair. You won't even barely feel the curve. You want to take small steps and test if it works You don't want to go too far because you don't want to send too much current through the laser diode If you do, you could potentially burn it out, these are already set at the factory, usually near or at the limit of the laser diode.
So you're actually going to push it beyond its limits ...
Again, I don't have the limits to what's actually in here. I don't have the specs for this board that didn't have the actual diode pulled out Look, but that's my guess. Over time, the performance degrades so you can push it a little harder to get more life out of it.
So I'll just flip this over to grab it and I'm not even sure if you can see this on the camera I'm going to turn them both a little and take routing cables, I'll plug it back in here and slide this in or out for you can see if it works you know it was loading it didn't last time you fixed it this is just youtube music so charity monetization or something. So it's an easy fix, so if you have an old CD player, maybe a DVD player would buy you a little more time to fix it
What does there is no disk in the drive mean?
Generally speaking, this is caused by a removable disk that contains no media. According to support.microsoft.com, “there is no disk in the drive” can occur when either of the following conditions is true: You have a removable drive configured as drive letter C.
Friend I Shahbaz welcome you to Electric Point, at one point our DVD / Blue Ray player did not play the disc and it shows 'No Disk' error Change the lens so let the article start carefully Watch as we do open the lens assembly this error is caused by either a damaged slide and rotate motor or a damaged lens speed and power otherwise it will be damaged this motor is spinning at very low speed at 1Vit has no power on 1V supply so it can be damaged now let's increase its Voltage increases to 1.5Vit speed, but it has no current, when I touch it with my fingers the motor is changed, the error has been corrected by the DVD player.
Don't forget LIKE || SHARE || COMMENT
How do I insert a disk into drive?
Start by pressing the drive's eject button, which pops out the tray (often called a drink holder in computer jokes). Drop the disc into the tray, label side up. Gently nudge the tray back into the computer. The tray slides back in the rest of the way on its own.
Hi friend this is Amandeep Singh Pawarand You are watching a special Gyantoday today I in this article we are going to see which is your USB stick Have you ever plugged your USB stick into your laptop you will see an option that means that this is a popup option.
Put the hard drive in the pen drive Generate why it is generated the reason for the generation if you used malicious code software if you try to create a bootable pen drive you will not be bootable because there is malicious code unlocated the reason of Loacted, it shows a pop option that you saw on your screen Insert the hard drive into the USB stick to fix this error. See the entire article to get it right. So without wasting time let's get started, friends, this is my laptop screen Now I'm going to show you my pen drive show is displayed Insert the floppy disk into the pen drive Insert my pen drive into my laptop okkkMy USB stick is now plugged in, now you need to see a pop option on my laptop screen Please insert the floppy disk into the USB stick This problem generally occurs when creating a bootable USB stick when the USB stick is not bootable this problem is showing up on your laptop screen don't worry i will give you the solutionplease cancel it and you have to follow my stepsplease click this pcokay and right click on it go to option of manager you have seen That there are certain options Computer Management, System Tools, Task Manager, there are many options you need to choose the Disk Management option you need to click on it You have accessed the partition of your USB stick and there the system hardware drives.
So click on unlocated partition There is an unlocated partition This is your unlocated partition of your pen drive You need to provide the name of this pen drive because your pen drive condition is unlocated so you have to click and click on it to create a new simple volumeokk kand go to the next option click on it and this is your pendrive size in the form of MBmegabyte ok click to next and give a pendive a letter or drive letter whatever you like you can change the pendrive icon next option give pendrive whatever you want so my pendrive is sandisk so give the name sandiskokunderscore 32gbok as you like you can change the name click next and the partition is ntfsnew technology filesystemokay everything is fine , click on the next Finish now that your pendrive becomes a pendrive and e Create a healthy pendrive in the form of NTFS formatok click on this PCyou must see that the pendrive is working, it is completely okkok click on nothing in my pendrive so there is no content on my pendrive my data is completely erased and there are none Information in it, so your pendrive is completely ok, so this problem is completely solved
How do I fix a flash drive that says Insert disc?
- Log in to the account with administrative privileges.
- Plug-in USB flash drive in the USB port.
- Go to My Computer or This PC > Manage > Disk Management.
- Right-click USB flash drive and select Change Drive Letter and Paths.
What should I do if there is no disk in my computer?
There is no disk in the drive, please insert a disk into drivedeviceharddiskDr1. According to Google searching results and Microsoft community, it's not a new problem for users to meet 'There is no disk in the drive. Please insert a disk into drivedeviceharddiskDr1 etc. similar error message.
Why is there no disk in vmware.exe?
Error: VMware.exe No Disk: Please insert a disk into driveDeviceHarddisk1DR1. (DR2DR3DR4 etc). The error message 'there is no disk on the drive please insert a disk in to drive' will pop up some times when we open the VMware Workstation software. It is a really annoying error.
How to resolve no disk in drive error Windows 10?
To resolve no disk in drive error Windows 10/8/7, change the drive letter assignment for the removable drive to any letter other than C. You can use one of the following methods: First of all, you may consider employing a professional yet free partition manager to do this as such software usually brings easier operations.
When is there no disk in the drive?
According to support.microsoft.com, “there is no disk in the drive” can occur when either of the following conditions is true: You have a removable drive configured as drive letter C. You do not have a removable disk in the removable disk drive.