Home > FAQ > Afterglow headset buzzing - practical decisions

Afterglow headset buzzing - practical decisions

Why does my headset make a buzzing noise?

There are many causes for the buzzing noise in headphones issue. One of the common reasons is the electronic interference. Apart from that, the hardware issue can result in the buzzing sound from the headphones. In addition, the software issue, such as driver corruption probably causes the issue.

From the beginning I could feel it in my heart. all the way from the start. hey what's going on out there i'm Sean Divine hope you're all fine today i want to talk about how to get rid of unwanted noise from your vocal recordings a lot of you out here have a lot of concerns about more noticeable noises happening in your vocals and then there are some that are just very subtle that become a bigger problem once we start processing the vocals, mixing and compression EQs make all of those things end up making the sound more noticeable and it's just really not great Look if you want the most professional vocals possible, so we're going to talk about some preventative measures you need to take first so that you can avoid the noise before you start recording.

userinit.exe bad image

This will make things a lot easier once you get into the DAW and start editing your vocals to talk about some ways you can at least help the noise, if you've already recorded it, you have it and you need the one Let's talk about the first three ways that I'm going to put noise into your voice before you start recording, so the first way is just room noise for me. My main problem with room noise is that I have some very bright lights that create a buzz in the back of the room, so in general, if I record something that isn't a tutorial where I don't need the lights, that's off. So you need to be walking around your room becoming more aware of those things that are making those unwanted noises humming you may have an upstairs refrigerator or something that is making a low rumble You may have an air conditioner, there are several things that are making the noise so you want to turn your mic on the gain so high that you have a really healthy signal to the mic and just walk around and see where you can pick up this kind of thing, try to eliminate it if you can't get rid of the noise, try to minimize it and keep your microphone as far away from it as possible.

So, if you need to put your microphone across the room away from the air conditioner, this is what you want to do. The second way to introduce noise into your vocal recording is either through the microphone itself or through your preamp or audio interface so that certain microphones are quieter than others, for example I use this SM7b that I usually use for my tutorials and mine I'm actually using spoken content, and it's actually one of the louder microphones I have got what is called a cloudlifter that offers 20 to 20 dB of clean gain so I don't have to push the preamp so hard that the preamps themselves actually have a bit of noise and the higher up you have to place this preamp, some preamps have a more audible noise than others, so be aware of the noise level from your microphone. The best way to experiment with it is to try out a few different microphones, for example the sm7b is the loudest microphone I own the quietest microphone I own the NT1 from Rodeit has very little to no inherent noise I can't notice anything even when the preamp is turned all the way up it's very, very quiet so you can just experiment and see if it's the preamp making the noise, or if it's just one of them your microphones are louder than the others, but you want the cleanest preamp gain possible, so do a little research on your preamps and audio interfaces and make sure you're producing clean gain and not a very high signal-to-noise ratio, so the third way that you get noise into your vocal signal is only due to an electrical problem.

Now there are a number of different things that can cause electrical problems in your studio, but the first would be that you might only have one type of component in your chain plugged into the same outlet causing some type of interference, for example the monitors, my main monitors, they are not electronically shielded as well as some of the other components in my studio and so they are making a little hum and I have to make sure these are turned off or I can actually hear this in my preamp so these have to be be off, things like the one you want to notice and this is really a matter of trial and error in unchecking everything that plugs each thing individually I have a keyboard that makes a bit of noise and I have these little things that I'll show you in a second it's called Hum X and you can actually connect your three prong plug to I. plug your component into the hum X then plug it into the wall and that helps with the ground loop my computer is actually connected to one of those hum XI washing a very strange ground loop sound it almost sounded like a cell phone glitch with lots of deep-end of the rumble that happened and I had to plug my iMac into my computer on a hum X to get rid of that so you may actually have some of this from the computer itself, so you want to check all the components one by one and see what happens causing a ground loop is therefore the absolute last resort that you may have electrical problems in your studio or home as far as the wiring itself is concerned. This is not as easy as repairing it, it is actually very expensive that you may need to hire an electrician Come and make sure your home or studio is properly grounded I haven't seen many cases where this is the cause of the problem was, but I've heard of it happening but mostly we talk about these things, if you just cover everything and look at it one by one, you can isolate the problem and you will find a solution in these steps .

We got it right overall, so we talked about how to avoid some of that noise in your vocal recording, but let's just say it too late, you already have a noisy signal in one of your sessions and want to try it afterwards it's a little harder to deal with, but there are a few options I would like about my favorite methods of handling and reducing noise it catches on, so let's get started and get into Logic Pro. I'm going to show you a couple of ways we can try to tame this in hindsight, so here I have a session of some loud singing that I want to show you here for just a second, but the first thing I want to point out is that I actually have this control on my interface that we can use to edit the incoming signal a bit, so many of you have probably noticed that it is silent when I am silent, so I am using a noise gate in the dynamic section here that is now goes into my interface, when I turn off the noise gate, is that the noise of my hard drives on my computer and a little white noise made by the actual microphone, so when I get that? This can be very useful for you when recording your singing, it just makes it less noticeable if that noise isn't there when I'm not talking, singing or rapping or whatever I'm doing I would recommend it if you are you're not just doing that where i'm taking a screen capture, when you are recording you know you'll be shuffling later. I would do the noise in the noise gate afterwards, so you would just leave that out and then once we get into the DAW itself, we can do the same, but you don't want to get rash with this noise gate because sometimes when you do that Threshold not set properly, you may know a bit of a rasping or so or so at the end of a phrase, or just a little subtlety in a performance that's a little softer than the rest of that with a noise gate going into your recording chain, cut out so just leave that in the DAW for the mixing process, now let me just show you a chant that was just recorded like the one right next to my computer a lot of hard drive noise and just let me follow for you that I tried myself Finding in all the wrong places and calling all the wrong faces for love ah yes what you see is not what you come back in '09 sometimes, I have a feeling as if I'm dying, never again you're left counting down the hours you have to find love counting down the hours so you can hear the sound in the voice and what I like to do is use this tool called NS 1 von Wellen and just me To let Play thisback that is without them again never give anyone so much power that when it gets mad you are left to count down the hours, that the love is deep within you, that you define your purpose, it is not up to you nobody else and I am So if I turn this on now and never give someone so much power that you count down the hours when it gets mad, you have to find love deep within yourself, it's up to you to your purpose think it's not up to anyone else and me I breathe a deep sigh that I managed to get out of your claws I wish you the best, but you can't tell me anything just so that there is actually a bit of the room noise as well ige of the hard drive noise and hiss picks out a very useful tool on top of that and there are many other types of noise cancellers out there that's just the one I use the most.

There is some incredible technology out there that can take this stuff out of the record, but in general you know something really simple and Anoise Gate is all I need and the key here is that you do all the preventative things we talked about you don't have to do that much work and of course you know that there will be situations when it just isn't possible. You're in a less than ideal environment and can't handle the noise until afterwards, but if you can it will make your job a lot easier so you don't have to be in here doing lots of science experiments to get the noise out of your Remove signal, okay, these are a few ways you can both prevent and handle noise in your voice. Recordings the key here is, you have to experiment.

I sometimes spent hours and hours over a few days trying to source one Narrow down the ground loop or some white noise that has been introduced into my signal somewhere and sometimes it can be really hard to find, but all you have to do is unplug it and try different microphones. Find out how your preamp behaves when it makes noise different components together will make some noise Your room may have noise as an airplane is flying overhead that you can probably hear so all these things you just have to be aware of them and hopefully this will help you further if you have any questions or comments about noises and leave your voice recordings below if you have learned something in the article please like and subscribe and will talk to you soon

How do I stop my Xbox headset from buzzing?

You should see a bunch of microphone settings that weren't there before, but you want to turn “headset mic” off, and “mic monitoring” all the way down to zero. That should do the trick.

What's up guys, you guys Nicklefritz is here today and I have a little tutorial or how to basically stream for so long I've been recording for so long I've been doing this for two years I'm still a pretty little channel but I always am I'm researching how I can improve the quality of my articles, my audios basically everything I can do with my lights and the like, but I had astral I have two sets of asteroids I had three, I gave one away I don't try it to bend, but I've had asteroids for so long and I've always had the string ports you know so I can get into game chat and it works, it works, but with Astros you always get a hum like a real bad hum while you're doing a streaming recording and that's when you get one in game like yes there are ways to walk around with skype or mumble or teamspeak ode r something like that but i love to play with my friends online and don't have to go through all those jumps and hoops and stuff so i'll show you how to get rid of that hum with your astro a40s basically plug in your astro a40s i will try to show you my webcams up here the best I can I'll move it around pretty much let me know what to wipe my astro a40s i live in arizona so it's always dusty i have a lot of my stuff on mine Desk is really dusty at the moment and i will show you how little i guess how it sounds the difference in sounds between how it sounded and how it sounds now when you have astro a 40s and try again to get rid of that hum it has to take care of it.

The only problem is you have to raise your audios a little more than usual and that's fine unless you already have them at the top and then I don't know what the heck you're going to do but let it be me take off my webcam and my astros are sent to Jesus Christmich. My room is so dirty. I'm sorry my Astros are right here, or my Astro-Mix-Sendmy Astros are actually sitting on my PS4, so it actually works when the tournament is over and then I plugged this in straight to my computer not the i just m yyeah they ain't no jesus rags but basically what your looking for your stream port them back and you will probably get really crazy from it and that's all you need to get rid of the hum i watch that on spoon i guess it spoon handles are channel and as that little box is called, it's called the ground loop noise isolator and basically that's why you get so much hum from your astros, all the electronics are in here, i'm not a scientist or an electrician or anything but there There's a lot in there where it is It's the constant currents of electricity flowing through it, and to stop this hum of electricity you have to Si e ground this electricity like it sounds but basically it's like ezz plug this into your 3.5 in the stream port and then you have a female 3.5 so you have auxilary plugged in let's see if i can handle it he is like a boss let me get this right sorry for the dust guys i live sookay in arizona so that's a plot on the back of my stream port on my mac astromech sam here is an auxiliary that goes from my computer Salim Inlet and we're just going to stick it in the other half of this earth isolator Sorry for all the noise guys it's pretty hard to do this with just one webcam so let's just plug that in and go, it's that simple me found this on eBay like i said i saw a article of Aspoon Handle that i will link in the description below but i found it on eBay it was only ten bucks if you on this stream or on youtube are.

deactivate office 2007

It's a great investment when you have Astros and get this home, not a very entertaining article unfortunately, but here are the before and after of what it sounded like and how it sounds now that dirty brooh I thought that was you, you know you, i thought this was your wall that is running and then i just coded you at trying to get into the gamechat and hopefully it works, if you have any questions write them in the comment section below and see you next time this your single for your bachelorette party, you know I got over it

How do I make my microphone stop buzzing?

Right-click on the Microphone bar, and then select Properties. Find the Levels tab, and look for the Microphone Boost tool. Move the dial all the way down on the Microphone boost. Move the dial all the way up on the Microphone.

How can I make the buzzing in my headset go away?

Guys look this is completely annoying, all this buzzing and everything. You can try to lower the volume on your adapter which will make the buzzing in your headset decrease but not go away completely. If you want the buzzing to go away for good then there is one downside of it. Go to Settings>Preferences>Vibration. Then turn the vibration off.

Why does my headset make a buzzing noise?

There is a buzzing or beeping sound in my headset that gradually gets louder. How do I prevent this from happening? Answered! View the answer I have this problem too Is this a good question? Very high volume settings may cause noise from the speakers to be picked up by the microphone.

What to do if your headset is making static noise?

Hold the power button on the console for 8 seconds or until the power shuts down completely. Unplug the power cord from the back of the console for 5 minutes. Plug the power cord back in and restart the console.

How to get rid of humming and buzzing noise?

If you have a two-prong power plug that both have the same sized plug (not the one with the bigger left prong), try turning the plug upside down and plug it back into the socket. This worked for me. I found out about this here: http://forum.audacityteam.org/viewtopic.php?f=26&t=4769

Other Questions In This Category

Amd installer startup - practical solutions

Can you tag a PNG file? png files and . jpg files. You can put something in the file name to make it searchable, but you cannot add a tag to the png file to have any type of searches work on it.

Second monitor frozen - a solution to

How do I fix requested operation requires elevation? What Does 'The Requested Operation Requires Elevation' Mean in Windows 10? As the error message indicates, you can only gain access to or take ownership of the file/folder by getting the elevated permission of a local administrator. So, to resolve the problem, you need to change the ownership of the drive.

Cbs log corrupt - search for solutions

How do I force a Bluetooth device to delete? 2. Uninstall Bluetooth devicesGo to Start and type Device Manager.Select the View tab and click on Show hidden devices.Uninstall the Bluetooth devices (right-click on them and then select Uninstall)Restart your PC.